Solar Panel Savings Calculator
A solar system's value starts with two numbers: how much power it generates, and how much of that generation you actually use. Enter the system size in kilowatts, your area's average peak sun hours, and the share of generation you expect to use in the home to estimate generation and savings.
Results
Your results will appear here. Fill in the form and press Calculate.
How this calculator works
Generation is straightforward: system size × peak sun hours gives kilowatt-hours per day. A “peak sun hour” is not an hour of daylight — it is the equivalent of one hour at the standard test intensity of 1,000 W/m², which is how installers summarise a whole day's sunshine.
Savings are where honesty matters. A generated kWh only saves you the full retail rate if you would otherwise have bought that kWh. Power exported to the grid is usually paid at a much lower feed-in rate, so this calculator values only the self-consumed share at your retail rate and shows the gross generation value separately. Real systems also lose roughly 10–20% to inverter losses, temperature, shading and dirt; treat the output as a good-weather estimate and let installers quote with site-specific tools before you sign anything.
What can move the real number. Four things, mainly. Export credits: power you send to the grid may earn a feed-in payment or net-metering credit — usually well below the retail rate, but not zero, so real returns can be a little better than the self-consumption figure alone suggests. Degradation: panels lose roughly 0.5% of their output per year, so year ten generates about 5% less than year one. Maintenance: cleaning, servicing and one inverter replacement during the system's life all cost money that this estimate does not deduct. Time-of-use tariffs: if your tariff prices electricity differently by the hour, a self-consumed kWh that displaces expensive evening power is worth more than one at midday — and exported midday power may be worth very little. Your actual savings sit somewhere in the range these factors create; the headline figure is a planning estimate, not a forecast.
The formula
Savings = kWh generated × self-consumption % × rate per kWh
Worked example
A 5 kW system with 4.5 peak sun hours generates 5 × 4.5 = 22.5 kWh per day, about 675 kWh a month and 8,213 kWh a year. If 70% is used in the home at $0.17/kWh, the yearly potential saving is 8,213 × 0.70 × $0.17 = $977.29 — roughly $81 a month off the bill. That figure is an estimate: it values only the self-consumed share, treats the exported 30% as worth nothing, and ignores degradation and maintenance. The gross value of all generation at retail rate would be $1,396.13, which is why self-consumption is the number to watch.
Frequently asked questions
What are peak sun hours in my area?
They range from about 2.5 a day in the UK to 6+ in Arizona or inland Australia, as annual averages. Solar irradiance maps from your national meteorological service give the figure for your postcode; installers also quote it in proposals.
How much of my solar power will I actually use?
Without a battery, households commonly self-consume 30–60%, because generation peaks at midday when many homes use little. Shifting the dishwasher, washing machine and EV charging into sunny hours raises it substantially.
Does this account for panel degradation and losses?
No — it is a clean first estimate. Real output typically runs 10–20% lower after inverter losses, heat, shading and soiling, and panels degrade roughly 0.5% a year. Use it to compare scenarios, not as a guarantee.
Is exported electricity worthless?
Not worthless, but usually paid well below the retail rate through feed-in tariffs or net-metering credits, which vary widely by country and state. That is why this calculator values only self-consumed power at the full rate.